HARLEY TRAILER HITCH
High Quality Parts from CAS4
SEARCH ABOVE LINKS MOST UPDATED
TOWING INFORMATION - CALL IF YOU CAN NOT
FIND WHAT YOU NEED - 845-786-0620
TRAILER HITCHES for 2009-2011 H-D TRI GLIDE® and STREET GLIDE® TRIKE models
Trailer hitches are now available for the H-D trike models. 1 ¼”, all steel, receiver style hitch mounts securely to the trike frame. Robotic welded and high gloss black powder coated. Includes polished chrome plated hitch ball mount, 1-7/8” ball, pin with hitch clip and all mounting hardware. KW hitches provide a mounting location for a 5 pin round female connector as part of the safety chain bracket. Gross weight not to exceed 300#. Made in USA
Optional Plug and Play wiring harness kits:
KW720585 - 2009-2011 Five-pin male female die cast connector plugs with 8 pin AMP Multilock Plug-n-Play wire harness. $ 79.95
KW720582 - 2009-2011 Five-pin male female die cast connector plugs with 8 pin AMP Multilock “Plug-n-Play” isolator relay/wire harness. $ 115.00
DS39020065 - KW720565
DS39020066 - KW720570
DS39020067 - KW720575
DS39020069 - KW720585
BUMPER TRAILER HITCH FOR HARLEY
Fits 2009 FLHT, FLHX, AND FLHR
hitch for the 2009 Harley baggers that have rear fender rail/bumper and/or
fender filler strips. Will fit FLTR and FLHRC models leaving a gap between
the chrome bumper and the rear fender. Upper hitch brackets mount to the
inside frame/fender struts and the lower brackets anchor to the saddlebag
supports. No unsightly black painted brackets mounted outside the factory
chrome fender strut covers. No interference with Genuine Harley-Davidson
accessories such as docking kits for sissy bars, racks and tour boxes. Main
frame is made from .125 1020 wall steel tubing, robotic welded, polished and
chrome plated. Includes 1-7/8” ball. Mounts with factory hardware. Our
optional chrome plated 5 pin die cast automotive style connector set
(includes mating trailer connector) and mounting bracket kit bolts directly
to the safety chain bracket on the hitch. The kit also includes a plug and
play wiring harness.
DS39020065 - Bumper Trailer Hitch for 2009 -up, FLHT, FLHX, and FLHR M.S.L $239.95
DS39020069 - Five pin connector kit w/wiring harness - may need to hard wired into wire harness M.S.L. $69.95
RECEIVER TRAILER HITCH
for FLTR and FLHRC models
1 ¼” receiver trailer hitches for the 2009 Harley baggers. A version for FLHT, FLHR and FLHX that have rear fender rail/bumper and/or fender filler strips and one for FLTR and FLHRC models. Mounts to frame struts and the saddlebag supports. No interference with Genuine Harley-Davidson accessories such as docking kits for sissy bars, racks and tour boxes. Main frame is made from .125" 1020 steel tubing, robotic welded and high gloss black powder coated. Includes polished chrome plated hitch, 1-7/8” ball and pin with hitch clip. Our optional chrome plated 5 pin die cast automotive style connector set (includes mating trailer connector) and mounting bracket kit bolts directly to the safety chain bracket on the hitch. The kit also includes a plug and play wiring harness. Made in USA.
DS39020066 - Receiver Hitch, low for 2009 - up, FLHT, FLHX, FLHR M.S.L. $299.95
DS39020067 - Receiver Hitch, high for 2009 -up, FLTR, FLHRC M.S.L $299.95
DS39020069 - Five pin connector kit w/wiring harness, may need to hard wired into wire harness M.S.L. $69.95
TRAILER HITCH FOR FLT, FLHT, FLHS, FLHR AND ULTRA
Trailer Hitch for 1980-08 FLT, FLHT, FLHR.
Chromed with a 1 7/8" ball that's a perfect match to our saddlebag light bars
Made of heavy-duty steel; the hitch plate is reinforced for extra strength
Fits 1980 - up FLT, FLHT, FLHS, FLHR and Ultra models (will not fit FLH)
Includes mounting hardware; made in the U.S.A.
Stock 130 / 140 wide tire only , NOT FOR WIDE TIRE HARLEYS - ANYTHING OVER A 150.
The tongue weight of the trailer, when attached to the hitch, must not exceed 10 percent of the total trailer weight and its contents -- with the maximum tongue weight not to exceed 30 lbs. Also remember when pulling a trailer with a motorcycle, extra distance must be allowed for stopping and a slower speed used when cornering. Use extra caution, and don't exceed your limits.
The standard of the industry! 1-7/8" ball included. Fits 80-08 FLT, FLHT, 99-08 FLTR (does not fit FLH, or FLHX ); 94-08 FLHR.
|DS720554||Trailer Hitch for 1980-08 FLT, FLHT, FLHR - TRAILER HITCH FOR FLT, FLHT, FLHS, FLHR AND ULTRA ( CC31549)(WK720555B)||$219.95||$192.95|
TRAILER HITCH FOR FXST, FLST
for Heritage Softail®
Trailer hitch, fits 90-09 FLST (not FLSTF); also fits 86-99 FXST models. M.S.L.
Does not fit with H-D rear dresser bars or rear fender rails. Use KW #190050B.
|DS720601||For 1986-05 FXST - 1986-09 FLST (except FXSTD / FLSTN / FLSTF / FLSTS / FLSTSB ) models. (KW720600C)||$324.95||$285.95|
TRAILER HITCH RECEPTACLE KIT
|DS720558||For FLT, FLHT, FLHS, FLHR, and 86-up Softail||$39.95||$37.95|
|DS708136||Repl. five-pin connector only (ea.)||$12.95||$12.95|
If you don't see it here, E-mail us.
We haven't had a chance to post it yet.
We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.
Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .
Our intention is to provide products that can be used on a Harley-Davidson®
CAS sells officially licensed Harley-Davidson® products.
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, TC88, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail, Sportster, Sturgis, Super Glide, Low Rider, and
Wide Glide are registered trademarks of Harley-Davidson® Inc., Milwaukee
Wisconsin, U.S.A. The words, VROD, V-ROD, Duo Glide, Dyna Glide, Fat Boy, Hydra Glide
and Bad Boy are trademarks of Harley-Davidson®, Inc., Milwaukee, Wisconsin, U.S.A.
The following model designations for Harley-Davidson® motorcycles are used in
this catalog for reference only: EL, FL, FLH, FLHR, FLHS, FLHT, FLHTC, FLHTC-I,
FLHTS, Ultra, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLT, FLTC, FLTC Ultra,
FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS, FXDS-Conv., FXDWG, FXE, FXEF,
FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-Conv., FXRS-SP,
FXRT, FXS, FXSB, FXST, FXSTC, FXSTD, FXSTS,FXSTSB, FXWG, GE, K, KH, WL, WLA,
XL, XLCH, XLCR, XLH, XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX and
XR1000. Buell, S1, S2, M2, Cyclone, Lighting, Thunderbolt, X1. All other brand names
or trademarks, or registered trademarks used in this catalog are the property of their
Please review our terms and conditions page Thank You