 |
 |
 |
 |
 |
|
|
|
|
|
High Quality Parts from CAS4
CYLINDER
HEAD
VALVE SPRINGS
Manley Valve Spring Lift Kits
Increase the amount of valve travel without binding for use with high-performance
camshafts with higher-than-stock lift. Kits are packaged with interference fit, reverse
wound springs to reduce harmonics and control spring surge. Most kits are available with
titanium collars for ultimate performance, or with steel collars as a lower cost
alternative. Kits requiring special machining operations include complete instructions.
Valve keepers are not include
Lift Kits for 1957 thru 1985 Sportster® Models
Stock-diameter springs with 20% more pressure. Includes steel top collars and uses stock
lower collars. Springs 90 lbs. at 1.310", 300 lbs. at .810", bind at
.750"..
| Part # |  Description |
List Price | Your Price |
| CC99217 | Lift Kit, Stock to .500 " lift for 1957 thru 1985 Sportster® Models | $105.95 | $92.95 |
| CC99294 | Lift Kit, Set of eight valve keepers for 1957 thru 1985 Sportster® Models | $34.95 | $29.95 |
| CC99500 | Set of four replacement springs for 1957 thru 1985 Sportster® Models | $65.95 | $59.95 |
High-lift performance kit
has larger-diameter rings. Includes titanium top collars and steel lower collars. Springs
110 lbs. at 1600", 365 lbs. at 1.000", bind at .930".
| Part # | Description |
List Price | Your Price |
| CC99224 | High-lift performance kit 500" to .600" lift | $136.95 | $119.95 |
| CC99294 | Set of eight valve keepers | $15.95 | $13.95 |
Note: Kit 99-224 requires special tool below.
Check cylinder head thickness before machining spring seat - some late Sportster®
models are thin in this area. You may need to use CCI #99-003 intake valves for sufficient
installed height.
Special tool for CCI #99-224 kit. 11/32" pilot and 5/16"- pilot so valve guides need not be removed. Top of guide machining needed to avoid contact with top collars.
| Part # | Description |
List Price | Your Price |
| CC41854 | Installation tool | $15.95 | $13.95 |
.465" Lift Kits for Shovelheads
Use with stock or Manley thin-stem valves. Kits include springs, upper collars and use
stock lower collars. Oversize springs require no machining. Springs 150 lbs. at
1.450", 300 lbs. at 1.000" bind
at .950".
| Part # | Description |
List Price | Your Price |
| CC99218 | Kit with titanium collars for stock stem diameter valves | $122.95 | $109.95 |
| CC99216 | Kit with steel collars for stock stem diameter valves | $76.95 | $69.95 |
| CC99219 | Kit with titanium collars for Manley thin stem valves | $122.95 | $109.95 |
| CC99295 | Set of 8 keepers for CCI #99-216 and #99-218 kits | $15.95 | $13.95 |
| CC99294 | Set of 8 keepers for CCI #99-219 kit | $15.95 | $13.95 |
| CC99501 | Set of four replacement springs | $49.95 | $44.95 |
.495" Lift Kits for Shovelheads
Same as '.465" Lift Kits' but with special lower collars for additional spring
travel. Kits do not require cylinder head machining for installation
1966-79
| Part # | Description |
List Price | Your Price |
| CC99215 | .495" Lift Kit with steel collars for stock stem diameter valves | $93.95 | $84.95 |
| CC99229 | .495" Lift Kit with titanium collars for stock stem diameter valves | $145.95 | $129.95 |
| CC99235 | .495" Lift Kit with titanium collars for Manley thin stem valves | $145.95 | $129.95 |
| CC99295 | Set of 8 keepers for CCI #99-215, #99-229, #99-237 and #99-238 kits | $15.95 | $13.95 |
| CC99294 | Set of 8 keepers for #99-235, #99-239 kits | $15.95 | $13.95 |
| CC99501 | Set of four replacement springs | $49.95 | $44.95 |
1980-84
| Part # | Description |
List Price | Your Price |
| CC99237 | .495" Lift Kit with steel collars for stock stem diameter valves | $109.95 | $98.95 |
| CC99238 | .495" Lift Kit with titanium collars for stock stem diameter valves | $159.95 | $140.95 |
| CC99239 | .495" Lift Kit with titanium collars for Manley thin stem valves | $159.95 | $140.95 |
.600" Lift Kits for Shovelheads
Titanium top collars with steel lower collars and special interference fit tri-springs.
180 lbs. at 1.600", 360 lbs. at 1.000", bind at .930".
| Part # | Description |
List Price | Your Price |
| CC99225 | .600" Lift Kit for stock stem diameter valves | $133.95 | $119.95 |
| CC99226 | .600" Lift Kit for Manley thin-stem valves | $133.95 | $119.95 |
| CC99295 | Set of 8 keepers for #99-225 kit | $15.95 | $13.95 |
| CC99294 | Set of 8 keepers for #99-226 kit | $15.95 | $13.95 |
| CC99222 | Set of four replacement springs | $49.95 | $44.95 |
Note: Requires special tools below. Machining
is required.
Installation tool with 3/8" pilot for CCI #99-225 and #99-226. This special tool includes a 3/8" pilot. A 5/16" pilot (CCI #41-516) is required for Manley thin-stem kit. Top of guide machining needed to avoid contact with top collars.
| Part # | Description |
List Price | Your Price |
| CC41853 | Installation tool with 3/8" pilot for CCI #99-225 and #99-226 | $109.95 | $98.95 |
| CC41516 | 5/16" pilot for CCI #99-226 | $28.95 | $25.95 |
.600" Lift Kits for Evolution® Models
Kits for up to .600" lift on Evolution® Big Twin and Sportster® models
1984 to present. No machining required, steel or titanium top collars used with stock
lower collars. Springs 170 lbs.at 1.800", 380 lbs. at 1.200", bind at
1.150".
| Part # | Description |
List Price | Your Price |
| CC99227 | .600" Lift Kit with steel collars For Evolution® Big Twin and Sportster® models 1984 to present. | $76.95 | $69.95 |
| CC99228 | .600" Lift Kit with titanium collars For Evolution® Big Twin and Sportster® models 1984 to present. | $122.95 | $109.95 |
| CC99296 | Set of eight keepers For Evolution® Big Twin and Sportster® models 1984 to present. | $16.95 | $14.95 |
| CC99502 | Set of four replacement springs For Evolution® Big Twin and Sportster® models 1984 to present. | $49.95 | $44.95 |
| CC99234 | Set of four replacement lower collars for stock to .650 lift | $22.95 | $20.95 |
Kibblewhite Lightweight Racing Valve Spring Kits
Matched Kibblewhite top-quality components improve valve train performance - especially
important with high-lift cams. Kits include:
* Four 7075 T6 hard anodized aluminum retainers
* Four 15-degree machined pairs of heat treated steel keepers
* Four double racing valve springs with lower spring collars
* Installation instructions
| Part # | Description |
List Price | Your Price |
| CC55130 | For all Evolution® Big Twin and Sportster® models 1984 to present. 160# to 180# seat pressure, up to .580" lift at valve | $89.95 | $80.95 |
| CC55133 | For all Sportster® models 1970 thru 1983. 160# seat pressure, up to
.460" lift at valve |
$90.95 | $80.95 |
| CC55134 | For all 74" and 80" Big Twins 1970 thru 1983. 160# seat pressure, up to .520" lift at valve | $76.95 | $69.95 |
Note: CCI #55-134 kit does not come with lower
collars. Use stock lower collars.
Kibblewhite Valve Springs for Panheads and Shovelheads
High-performance 190 lb. valve spring set for Panhead and Shovelhead engines 1948 thru
1966.
| Part # | Description |
List Price | Your Price |
| CC55197 | Kibblewhite Valve Springs, Set of four for Panheads and Shovelheads | $34.95 | $30.95 |
V-Thunder™ Valve Spring Kits
A perfect complement for high-performance cams, V-Thunder® kits provide strong
street performance with up to .600" lift cams in the Standard kits or up to
.675" lift cams with the severe service Super kits. For all Evolution® Big
Twins 1984 to present.
Super Kits
Include springs, locks, retainers and lower seats. Spring I.D.- .700",
O.D.-1.460".Spring pressure 180 lb. at 1.850", 440 lb. at 1.250", bind at
1.200"
| Part # | Description |
List Price | Your Price |
| CC30158 | V-Thunder™ Valve Spring Kit with chromemoly retainers | $79.95 | $71.95 |
| CC30159 | V-Thunder™ Valve Spring Kit with titanium | $129.95 | $112.95 |
Standard kit
Include springs, locks, retainers and lower seats. Spring I.D.-.700",
O.D.-l.460". Spring pressure 160 lb. at 1.850", 440 lb. at 1.250", bind at
1.200".
| Part # | Description |
List Price | Your Price |
| CC30156 | V-Thunder™ Valve Spring Kit with chromemoly retainers | $89.95 | $78.95 |
| CC30157 | V-Thunder™ Valve Spring Kit with titanium retainers | $125.95 | $112.95 |
S & S VALVE SPRING KIT FOR BIG TWINS
Fits Panhead and Shovelhead models 1948-1984. This kit is designed to be used
with stock style guides, bottom spring collars, 3/8" valve stems and keepers. Thin
stemmed valves may also be used if the keepers used are designed to compensate for the
difference in stem diameters. By grinding .060" to .090" off the tops of the
valve guides, cams with lifts up to .550" may be used. Panheads usually require
additional rocker cover to top collar clearance. Kit includes 4 aluminum top collars, 4
outer valve springs, 4 inner valve springs, and instructions.
| Part # | Description |
List Price | Your Price |
| CS010572 | S & S Valve Spring Kit For Big Twins | $46.95 | $41.95 |
S & S VALVE SPRING KIT FOR EVOLUTION®
Fits Evolution® Big Twins 1984-up and Sportsters® 1986-up. Designed for use with stock
style guides, valves and keepers. By grinding .030" off the bottom of the valve
keepers, cams with lifts up to .550" may be used. Kit includes 4 inner and outer
springs, 4 lightened steel top collars, 4 steel bottom collars, and instructions.
| Part # | Description |
List Price | Your Price |
| CS010639 | S & S Valve Spring Kit For Evolution® | $89.95 | $79.95 |
SIFTON VALVE SPRING KITS FOR BIG TWIN & SPORTSTER®
Sifton high performance valve springs are made to give the increased spring pressure
required with higher lift cams. Each set includes 4 double matched springs, 4 black upper
collars, 4 sets of keepers.
FITS BIG TWINS
| Part # | Description |
List Price | Your Price |
| CS010577 | SIFTON VALVE SPRING KIT Fits 1966-1984 Big Twins with .475" lift cams or higher | $96.95 | $85.95 |
| CS010578 | SIFTON VALVE SPRING KIT Fits 1966-1984 Big Twins with cams up to .475" lift | $96.95 | $85.95 |
FITS SPORTSTER®
| Part # | Description |
List Price | Your Price |
| CS010574 | SIFTON VALVE SPRING KIT Fits 1957-1985 XL models (lifts to .575", contains lower collars) | $109.95 | $98.95 |
SIFTON VALVE SPRINGS FOR PANHEADS AND SHOVELHEADS
Double-matched valve springs. Use with Sifton collars, keepers and valves for optimum
performance. For Big Twin models 1948 thru 1984 (except Evolution® models).
| Part # | Description |
List Price | Your Price |
| CS24160 | Sifton Valve Springs, Set of four For Big Twin models 1948 thru 1984 (except Evolution® models). | $37.95 | $33.95 |
A. CRANE PERFORMANCE VALVE SPRINGS AND
RETAINERS
Manufactured from the finest quality spring wire and precision wound to exacting
specifications. These high performance valve springs are subject to rigid quality control
inspections both during manufacturing and prior to packaging. Spring sets are available
alone or with chrome moly 4140 steel or light weight Titanium retainers. Retainer sets are
also available separately. Sold in set of 4.
FITS BIG TWINS 1948-1984
| Part # | Description |
List Price | Your Price |
| CS010704 | Valve springs 140 lb. with chrome moly retainers | $59.95 | $53.95 |
| CS010705 | Valve springs 140 lb. with titanium retainers | $104.95 | $93.95 |
| CS010701 | Valve springs only (inners and outers) | $44.95 | $39.95 |
FITS EVOLUTION® BIG TWINS 1984-UP AND SPORTSTERS® 1986-UP
Also includes keepers and lower spring seats.
| Part # | Description |
List Price | Your Price |
| CC24176 | Valve springs 175 lb. with chrome moly retainers (DS199722) | $65.95 | $58.95 |
| CC24568 | Valve springs 155 lb. with chrome moly retainers (DS199699) | $65.95 | $58.95 |
| CC24177 | Valve springs 175 lb. with Titanium retainers (DS199723) | $122.95 | $112.95 |
| CC24188 | Valve springs 155 lb. seat with Titanium retainers (DS199700) | $122.95 | $112.95 |
| CC24186 | Thermo Cool springs 175 lb. seat with Titanium retainers (DS199705) | $138.95 | $124.95 |
| CC24187 | Thermo Cool springs 155 lb. seat with Titanium retainers (DS199710) | $138.95 | $124.95 |
RevTech®-Valve Spring Kit for Evolution® Models
The 3-piece valve springs which are similar to those used in USAC circle track cars,
feature dual chrome-steel springs with flat wound dampers which eliminate spring surge.
They will accept cams of up to .600" lift and have higher spring pressures When
installing performance cams, total spring than stock. The biggest single difference
however, is that the RevTech® engineers opted to use 10º, top collars and
keepers rather than the standard 7° items found in most manufacturer's kits. This means
that the RevTech® spring kit is less likely to spit out a keeper during high-speed
operation or have a valve pull thru. Complete with heat-treated steel top and bottom
spring collars, keepers and 3-piece springs.
| Part # | Description |
List Price | Your Price |
| CC59640 | RevTech®-Valve Spring Kit For Evolution® Big Twin and Sportster® models 1984 to present | $114.95 | $99.95 |
RevTech® Valve Spring Shim Kit
A 12-piece kit that includes 4 shims each of .015", .030", and .060" thick
sizes that permit precise shimming form .015" to 105" in .015" increments,
enough to do one set of heads.
| Part # | Description |
List Price | Your Price |
| CC59633 | RevTech® Valve Spring Shim Kit May only be installed in conjunction with CCI # 59-640 RevTech® Valve Spring Kit | $14.95 | $13.95 |
Andrews Valve Parts for Shovelhead and Evolution® Engines
When installing performance cams, total spring assembly height should be checked
before operation. The valve spring collars and springs offered here provide correct total
spring assembly height without complicated machining on the heads themselves.
Low Profile Lower Spring Collars for Shovelheads
Low-profile lower spring collars for 74" and 80" motors. Similar to
1980-up OEM collars, but low profile for easier installation of high lift cams. Required
if using 1980 or later style valve guides which use seals like CCI # 24-347. Made form
heat-treated steel.
| Part # | Description |
List Price | Your Price |
| CC24296 | Andrews Low Profile Lower Spring Collars Set of 4 for Shovelheads | $27.95 | $24.95 |
High Lift Upper Collars for Shovelheads
When used with high-lift springs, these collars for 74" and 80" motors can
accommodate cams of up to.600" lift. Made from T6 aluminum.
| Part # | Description |
List Price | Your Price |
| CC24297 | Andrews High Lift Upper Collars Set of 4 for Shovelheads | $28.95 | $25.95 |
High Lift Spring Set for Shovelheads
For 74" and 80" motors. Provide the correct spring pressure for Andrews
Shovelhead cams. Installation doesn't require complicated machining.
| Part # | Description |
List Price | Your Price |
| CC24294 | Andrews High Lift Spring Set, Set of 4 For 74" and 80" motors. | $25.95 | $22.95 |
High Lift Spring Set for Evolution® Motors
For Big Twin and Sportster® motors. When used with the titanium upper collars listed
below, cam lifts of over .550" can be achieved. Installation does not require
machining.
| Part # | Description |
List Price | Your Price |
| CC24198 | Andrews High Lift Spring Set, Set of 4 For Big Twin and Sportster® motors. | $32.95 | $29.95 |
Titanium Upper Spring Collars for Evolution® Motors
For all Big Twin and Sportster® motors. Stronger than Original Equipment with .050"
more travel and a weight savings of 50%. Use stock keepers.
| Part # | Description |
List Price | Your Price |
| CC24199 | Andrews Titanium Upper Spring Collars Set of 4 For all Big Twin and Sportster® motors. | $61.95 | $55.95 |
Medium Lift Upper Spring Collars for Shovelheads
For 74" and 80" motors and designed to add .060" spring travel to stock
springs without other modifications. Simplify the installation of Andrews 'B' or '#2' cams
in stock Shovelhead motors.Heat-treated steel.
| Part # | Description |
List Price | Your Price |
| CC24295 | Andrews Medium Lift Upper Spring Collars Set of 4 | $28.95 | $25.95 |
Motor Factory® American Made Valve Spring and Collar Kits
Top quality American Made replacement valve spring kits for Big Twin and Sportster®
engines 1948-up. Designed for use with stock style guides and valves, each kit comes
complete with inner and outer springs, steel upper and low and valve keeper keys. Sold in
sets of 4.
FITS BIG TWINS
| Part # | Description |
List Price | Your Price |
| CS011030 | Motor Factory® Valve Spring and Collar Kit Fits Panhead and Shovelhead models 1948-1979 | $83.95 | $74.95 |
| CS011031 | Motor Factory® Valve Spring and Collar Kit Fits Shovelhead models 1980-early 1981 | $83.95 | $74.95 |
| CS011032 | Motor Factory® Valve Spring and Collar Kit Fits Shovelhead models late 1981-1984 | $83.95 | $74.95 |
| CS011033 | Motor Factory® Valve Spring and Collar Kit Fits Evolution® models 1984-up Up | $83.95 | $74.95 |
FITS SPORTSTERS®
| Part # | Description |
List Price | Your Price |
| CS011037 | Motor Factory® Valve Spring and Collar Kit Fits Sportster® models 1957-early 1981 | $83.95 | $74.95 |
| CS011038 | Motor Factory® Valve Spring and Collar Kit Fits Sportster® models late 1981-early 1983 | $83.95 | $74.95 |
| CS011033 | Motor Factory® Valve Spring and Collar Kit Fits Evolution® models 1986-up | $65.95 | $59.95 |
MOTOR FACTORY® AMERICAN MADE VALVE SPRINGS FOR BIG TWINS
Top quality American Made replacement valve spring sets fit Panhead and
Shovelhead models 1948-1984. Includes inner and outer springs. Replaces OEM 18205-57A. Set
of 4.
| Part # | Description |
List Price | Your Price |
| CS010571 | MOTOR FACTORY® AMERICAN MADE VALVE SPRINGS FOR BIG TWINS | $49.95 | $44.95 |
Sifton Lower Valve Spring Collars for
Panheads and Shovelheads
Set of four stock replacement steel lower valve collars for Panhead and Shovelhead motors.
Use with Original Equipment or Sifton valve springs. Sets of four.
| Part # | Description |
List Price | Your Price |
| CC24165 | Sifton Lower Valve Spring Collars 1948 thru 1979 | $29.95 | $26.95 |
| CC24166 | Sifton Lower Valve Spring Collars 1980 thru 1984 | $29.95 | $26.95 |
Crane Titanium Spring Collars for Panheads
and Shovelheads
For all Big Twins 1948 thru 1984 (except Evolution® models). Precision-manufactured
and heat-treated to provide maximum strength and durability. Black oxide finish.
| Part # | Description |
List Price | Your Price |
| CC24172 | Crane Titanium Spring Collars Set of four For all Big Twins 1948 thru 1984 (except Evolution® models) | $69.95 | $62.95 |
VALVE SPRING COLLARS
Top quality stock type replacement valve spring collars for most Big Twin, and Sportster®
engines. Sold in sets of 4.
UPPER COLLARS
| Part # | Description |
List Price | Your Price |
| CS010595 | Upper Valve Spring Collars Fits Big Twin OHV 1936-early 1981. Replaces OEM 18221-36 | $21.95 | $19.95 |
| CS010594 | Upper Valve Spring Collars Fits Big Twins late 1981-1984. Replaces OEM 18219-81 | $18.95 | $16.95 |
| CS010599 | Upper Valve Spring Collars Fit Big Twin Evolution® models 1984-up and Sportster® models 1986-up. Replaces OEM 18219-83 | $18.95 | $16.95 |
LOWER COLLARS
| Part # | Description |
List Price | Your Price |
| CS010591 | Lower Collars Fits Big Twins 1948-1979. Replaces OEM 18222-48 | $21.95 | $19.95 |
| CS010614 | Lower Collars Fits Big Twins 1980-early 1981. Replaces OEM 18222-79 | $22.95 | $20.95 |
| CS010592 | Lower Collars Fits Big Twins late 1981-1984. Replaces OEM 18222-81 | $19.95 | $17.95 |
| CS010593 | Lower Collars Fits Evolution® Big Twins 1984-up and Sportster® 1986-up. Replaces OEM 18222-83 | $19.95 | $17.95 |
COLONY VALVE COLLARS
These lightweight collars are machined from 7075 aluminum alloy for durability
and strength. Fits OHV Big Twin models 1936-1984 (except Evolution®) Set of 4.
| Part # | Description |
List Price | Your Price |
| CS050040 | Colony Valve Collars | $21.95 | $19.95 |
Crane valve Keepers
Heat-treated, precision-machined steel keepers with nearly twice the shear
strength of stock parts. For all Evolution® engines. Sets of eight.
| Part # | Description |
List Price | Your Price |
| CC24126 | Crane valve Keepers for 155 lb. spring sets | $12.95 | $10.95 |
| CC24127 | Crane valve Keepers for 175 lb. spring sets | $12.95 | $10.95 |
MANLEY VALVE KEYS
Hardened chrome moly keepers with black oxide coating. Sold in sets of 4 pairs.
| Part # | Description |
List Price | Your Price |
| CS011050 | Manley Valve Keys Fits Sportsters® 1952-1985,74" and 80" side valve models 1930-1948,45" side valve models 1932-up and Manley thin stem valves. Replaces OEM 18228-30 | $14.95 | $13.95 |
| CS011051 | Manley Valve Keys Fits OHV Big Twins 1936-1984. Replaces OEM 18228-36 | $14.95 | $13.95 |
| CS011052 | Manley Valve Keys Fits Evolution® Big Twins 1984-up and Sportsters® 1986-up. Replaces OEM 18229-83 | $14.95 | $13.95 |
VALVE KEEPER KEYS
Split type keys sold in packs of 4, enough for one engine.
| Part # | Description |
List Price | Your Price |
| CS010596 | Valve Keeper Keys Fits Sportster® models 1958-1985. Replaces OEM 18228-30 | $13.95 | $12.95 |
| CS010597 | Valve Keeper Keys Fits Big Twin models 1936-1984. Replaces OEM 18228-36 | $11.95 | $10.95 |
| CS010598 | Valve Keeper Keys Fits Evolution® Big Twins 1984-up and Sportsters® 1986-up. Replaces OEM 18229-83 | $16.95 | $14.95 |
Crane Valve Spring Shim Kit for Evolution® Models
For all Evolution® Big Twin and Sportster® engines. The 12-piece kit includes 4 shims
each of .01 5", .030" and .060" thick sizes that permit precise shimming
from .01 5" to .105" in .01 5" increments, enough to do one set of heads.
These shims should not be used with Original Equipment springs.
| Part # | Description |
List Price | Your Price |
| CC24181 | Valve spring shim kit For all Evolution® Big Twin and Sportster® engines | $8.95 | $7.95 |
If you don't see it here,
E-mail us.
We haven't had a chance to post it yet.
IMPORTANT:
We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.
Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
manufacturer.
We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .
Our intention is to provide products that can be used on a Harley-Davidson®
motorcycle.
CAS sells officially licensed Harley-Davidson® products.
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, TC88, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail, Sportster, Sturgis, Super Glide, Low Rider,
and
Wide Glide are registered trademarks of Harley-Davidson® Inc., Milwaukee
Wisconsin, U.S.A. The words, Duo Glide, Dyna Glide, Fat Boy, Hydra Glide and
Bad Boy are trademarks of Harley-Davidson®, Inc., Milwaukee, Wisconsin, U.S.A.
The following model designations for Harley-Davidson® motorcycles are used in
this catalog for reference only: EL, FL, FLH, FLHR, FLHS, FLHT, FLHTC, FLHTC-I,
FLHTS, Ultra, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLT, FLTC, FLTC Ultra,
FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS, FXDS-Conv., FXDWG, FXE, FXEF,
FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-Conv., FXRS-SP,
FXRT, FXS, FXSB, FXST, FXSTC, FXSTS,FXSTSB, FXWG, GE, K, KH, WL, WLA,
XL, XLCH, XLCR, XLH, XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX,
AND XR1000. All other brand names or trademarks, or registered trademarks
used in this catalog are the property of their respective holders.
Please review our terms
and conditions page Thank You