 |
 |
 |
 |
 |
|
|
|
|
|
High Quality Parts from CAS4
ROCKER
ARMS
TOP END PARTS
ALSO SOME RELATED
HARDWARE & OIL LINES
| Part # |  Description |
List Price | Your Price |
| VT110553 | Rocker arm set - As listed above - set of 4 | $260.95 | $240.95 |
| VT110571 | Rocker Arm Shaft Set - as listed above - set of 4 | $78.95 | $45.95 |
Crane Roller Rocker Arms
Made from investment cast 4140 alloy steel, these rocker arms feature replaceable roller
tips that reduce valve stem-tip wear and galling. Available with traditional bushing or
low friction needle bearing fulcrums.
Needle Bearing Fulcrum
Offers the strongest cyclical strength available. Cooler running and reduced valve train
friction is obtained by using needle bearings at the fulcrum which is 0-ring sealed and
pressure fed engine oil for longevity. Kit includes new shafts, and no machining is
required for installation. Sets of 4.
| Part # | Description |
List Price | Your Price |
| CC24190 | Crane Roller Rocker Arms With Needle Bearing Fulcrum For Evolution® Sportster® and Big Twin models 1984 to present and Buell® models 1996 to present (l.6:1 ratio) Sets of 4. | ||
| CC24191 | Crane Roller Rocker Arms With Needle Bearing Fulcrum For Shovelhead Big Twins 1966 thru 1984 (1.425:1 ratio) Sets of 4. |
Bushing Fulcrum
Crane's exclusive oil metering system lubricates the bushing for long-lasting performance
and reliability. Install on
Original Equipment or equivalent rockershafts. Sets of 4.
| Part # | Description |
List Price | Your Price |
| CC24153 | Crane Roller Rocker Arms With Bushing Fulcrum For Evolution® Sportster® and Big Twin models 1984 to present (1.6:1 ratio) Sets of 4. | ||
| CC24142 | Crane Roller Rocker Arms With Bushing Fulcrum For Shovelhead Big Twins 1966 thru 1984 (1.425:1 ratio) Sets of 4. |
Replacement Parts
| Part # | Description |
List Price | Your Price |
| CC24502 | Crane Front roller kit (set of 4) | ||
| CC24503 | Crane 0-ring kit for needle bearing rocker arms (pack of 8) | ||
| CC24504 | Crane Rockershafts for needle bearing rocker arms made before late 1995. For Shovelhead models (sold in pairs). See note | ||
| CC24505 | Crane Rockershafts for needle bearing rocker arms made before late 1995. For Evolution® models (sold in pairs). See note | ||
| CC24509 | Crane Rocker shafts for bushing or needle bearing rocker arms manufactured after late 1995, For Evolution® models (sold in pairs) See note. |
Note: Needle bearing rocker arms cannot use
OEM shafts due to hardness requirements for the needles. Rocker arms produced before late
1995 use a 'stepped' shaft with a smaller center diameter than the ends. Rocker arms
produced after late 1995 are marked with an 'X' and use a 'straight' single-diameter
shaft.
Rivera Adjustable Rocker for Evolution® Big Twins
These rocker arms are 'geometrically correct' for use in late-model motors. When adjusted,
the angles are 21' for the intakes, 27' for the front exhaust and 22' for the rear
exhaust, They have oversized swivel-foot adjusters with ±3° of adjustment and zero
side-load to the valve. Investment cast from carbon steel, and heat-treated to 60-62 on
the Rockwell scale. Sets of 4.
| Part # | Description |
List Price | Your Price |
| CC25115 | Rivera Adjustable Rocker For all Evolution® Big Twin models 1984 to present | $529.95 | $475.95 |
JIMS® HIGH PERF.ROLLER ROCKER ARMS FOR EVOLUTION®
Jims® roller rocker arms are investment cast from purified 4340 chrome moly steel and
heat treated, with JIMS® own proprietary process, to provide a rocker arm that's lighter
and much stronger than other rocker arms available today. The stock 1.625 ratio will
easily accommodate a .700" lift cam at the valve.
Use of JIMS® rocker shaft for Evolution®, CSI# 01 0948 or equivalent is recommended.
Other design features include:
·Special parabolic pushrod cup reduces friction, wear and improves
oiling
·Bearing grade steel roller tip for smooth operation
·660 bronze bushings for the best wear resistance and oil control
·20 grams lighter than stock
·Stock ratio for cams up to .700" lift
·Stock shafts are retained.
| Part # | Description |
List Price | Your Price |
| CC20424 | JIMS® Roller Rocker Arms Sold in sets of 4, Stock 1.6:1 Ratio. Fits Evolution® Big Twins and Twin Cams 1984-up, Sportster® 1986-2003 and Buell® models 1987-2002. | $455.95 | $412.95 |
| CC20921 | JIMS® Roller Rocker Arms Sold in sets of 4, Stock 1.7:1 Ratio. Fits Evolution® Big Twins and Twin Cams 1984-up, Sportster® 1986-2003 and Buell® models 1987-2002. Modifiucations to heads and or Rocker boxes may be required. | $455.95 | $412.95 |
PERFORMANCE ROLLER ROCKER ARMS
Alloy steel rocker arms are reinforced for maximum strength and machined on computer
controlled equipment for precision. The live roller tip eliminates performance robbing
drag caused by the rub pad of ordinary rocker arms and helps reduces valve stem wear
Available with needle bearing or our new bushing fulcrum. Sold in set of 4.
BEARING ROCKER ARMS
Features full compliment needle bearing fulcrum pivots to reduced reciprocating friction
and hardened, centerless ground rocker arm shafts.
| Part # | Description |
List Price | Your Price |
| CS010797 | Performance Roller Bearing Rocker Arms Fits Evolution® Big Twins 1984-up and Sportsters® 1986-up |
BUSHING ROCKER ARMS
Features a premium quality bronze bushing fulcrum for long range performance and increased
load carrying capacity. Designed to accept stock shafts (sold separately).
| Part # | Description |
List Price | Your Price |
| CS010798 | Performance Roller Bushing Rocker Arms Fits Evolution® Big Twins 1984-up and Sportsters® 1986-up |
Rocker Arms for Evolution® Models
Replacement rocker arms for Evolution® Big Twin Sportster® models 1984 to present. Sold
each.
| Part # | Description |
List Price | Your Price |
| CC26054 | Rocker Arm For rear exhaust / front intake (repl. OEM 17360-83) For Evolution® Big Twin Sportster® models 1984 to present. | $41.95 | $36.95 |
| CC26055 | Rocker Arm For front exhaust / rear intake (repl. OEM 17375-83 For Evolution® Big Twin Sportster® models 1984 to present. | $41.95 | $36.95 |
Panhead Rocker Oiler and Nuts
Exact reproductions of Original Equipment intake rocker oiler and the self-locking rocker
arm stud nuts.
| Part # | Description |
List Price | Your Price |
| CC26077 | Panhead Rocker arm oilers (repl. OEMs 18100 and 18102-49) sold in pairs | $13.95 | $12.95 |
| CC26083 | Panhead Rocker arm stud nuts (repl. OEM 7727) pack of 25 | $6.95 | $5.95 |
Rocker Arms for Shovelheads
For generator and alternator models 1966 thru 1984. Sold each.
| Part # | Description |
List Price | Your Price |
| CC26079 | Shovelhead Rocker Arm Fits rear exhaust/front intake (repl. OEM 17360-66) | ||
| CC26080 | Shovelhead Rocker Arm Fits front exhaust/rear intake (repl. OEM 17375-66) | ||
| CC28081 | Shovelhead Replacement bushing for rocker arms (repl. OEM 17428-57) sold each |
Rocker Arms for Sportster® Models
For Sportster® models 1957 thru 1985.
| Part # | Description |
List Price | Your Price |
| CC28029 | Front exhaust Rocker Arm (repl. OEM 17394-57A). For Sportster® models 1957 thru 1985. | $39.95 | $35.95 |
| CC28030 | Rear exhaust Rocker Arm (repl. OEM 17395-57A). For Sportster® models 1957 thru 1985. | $39.95 | $35.95 |
| CC28031 | Front intake Rocker Arm (repl. OEM 17396-57A). For Sportster® models 1957 thru 1985. | $39.95 | $35.95 |
| CC28032 | Rear intake Rocker Arm (repl. OEM 17397-57A). For Sportster® models 1957 thru 1985. | $39.95 | $35.95 |
| CC28081 | Replacement rocker arm bushing (repl. OEM 17428-57) sold each. For Sportster® models 1957 thru 1985. | $3.95 | $2.95 |
Panhead Rocker Arms and Assemblies
Quality reproductions of the stock parts for 1948 thru 1965 Panheads.
Rocker Arms Only
| Part # | Description |
List Price | Your Price |
| CC26074 | Panhead Rocker Arms Only Fits rear exhaust/front intake (repl. OEM 17360-48) | $33.95 | $29.95 |
| CC26075 | Panhead Rocker Arms Only Fits front exhaust/rear intake (repl. OEM 17375-48) | $33.95 | $29.95 |
Complete Assemblies
| Part # | Description |
List Price | Your Price |
| CC26081 | Panhead Rocker Arm Complete Assemblies Fits rear exhaust/front intake | $94.95 | $84.95 |
| CC26082 | Panhead Rocker Arm Complete Assemblies Fits front exhaust/rear intake | $94.95 | $84.95 |
JIMS Rockershafts
Precision-ground high-quality rocker shafts replace Original Equipment parts perfectly.
Sold each.
| Part # | Description |
List Price | Your Price |
| CC20639 | JIMS Rockershaft For 1984 to present Evolution® Big Twin and Sportster® motors (rep]. OEM 17611-83) | $18.95 | $16.95 |
| CC20638 | JIMS Rockershaft For Shovelhead Big Twins 1971 thru 1984 (rep]. OEM 17611-66B) | $43.95 | $39.95 |
Rockershaft for Evolution® Models
American-made, precision-ground and hardened steel shaft that duplicates the
Original Equipment part. For all Evolution® motors 1984 to present.
| Part # | Description |
List Price | Your Price |
| CC28027 | Rockershaft Repl. OEM 17611-83 (sold each). For all Evolution® motors 1984 to present. | $10.95 | $9.95 |
| CC28081 | Replacement rocker arm bushing (repl. OEM 17428-57) sold each. For all Evolution® motors 1984 to present. | $3.95 | $2.95 |
JIMS Rocker Arm Bushings
Replacement bushings made from solid bronze bar stock. for all Big Twins 1966 to
present and all Sportster® models 1957 to present. Set of 8.
| Part # | Description |
List Price | Your Price |
| CC20637 | JIMS Rocker Arm Bushings Set of 8 Repl. OEM 17428-57 Sportster® models 1957 to present. | $30.95 | $28.95 |
Rockershafts
Replacement rockershafts for Big Twin and Sportster® models. Sold each.
| Part # | Description |
List Price | Your Price |
| CC28026 | Rockershafts For Sportster® models 1957 thru 1985 (repl. OEM 17435-57B) | $21.95 | $19.95 |
| CC26078 | Rockershafts For Shovelhead Big Twins 1971 thru 1984 (repl. OEM 17611-66B) | $21.95 | $19.95 |
| CC20083 | Rocker arm shims for Shovelheads 1966 thru 1984 (.007") pack of 10 | $4.95 | $4.25 |
Kibblewhite Bronze Alloy Rocker Arm Bushings
CNC-machined from solid SAE-642 bronze alloy. Set of 8.
| Part # | Description |
List Price | Your Price |
| CC55138 | Kibblewhite Bronze Alloy Rocker Arm Bushings Set of 8 For all Big Twins 1966 to present | $18.95 | $16.95 |
Note: Must be installed and sized according to
factory service manual.
Ram Jett Rocker Adjuster Kit for Shovelhead Motors
Reduces rocker arm clatter and oil leaks from the rocker shaft end plugs. Contains
heat-treated pre-loaded spacers and seals to rebuild all four rocker shafts on Shovelheads
with either solid or hydraulic lifters. Holds the pushrod end of the rocker arm in
constant adjustment with a pre-loaded spring spacer. Eliminates the guesswork of rocker
shaft shims and provides a clatter-free rocker arm assembly. Includes four Ram Jett Seals
which will completely seal the rocker shaft end plugs against leaks.
| Part # | Description |
List Price | Your Price |
| CC15039 | Ram Jett Rocker Adjuster Kit for Shovelhead Motors | $21.95 | $19.95 |
| CC15041 | Ram Jett Seals only for Shovelhead Motors | $8.95 | $7.95 |
D. ROCKER SHAFT O-RINGS
Replacement rocker shaft 0-rings fit Shovelheads 1966-1984 and Sportster® models
1957-1985. Available standard or oversized. Replaces OEM 11101. Sold in packs of 10.
| Part # | Description |
List Price | Your Price |
| CS090553 | Rocker Shaft O-Rings Standard Sold in packs of 10 | $3.95 | $2.95 |
| CS090554 | Rocker Shaft O-Rings Oversized Sold in packs of 10 | $4.95 | $3.95 |
Chrome Rocker Arm Shaft Plug Sets
Sold in sets of four.
| Part # | Description |
List Price | Your Price |
| CC25199 | Chrome Rocker Arm Shaft Plug Sets For Sportster® models 1957 thru 1970 and Shovelheads 1966 thru 1970 Sold in sets of four. | $29.95 | $26.95 |
| CC25198 | Chrome Rocker Arm Shaft Plug Sets For Sportster® models 1971 thru 1985 and Shovelheads 1971 thru 1984 Sold in sets of four. | $32.95 | $29.95 |
ROCKER SHAFT NUTS
A stock style with your choice of colored plastic inserts. Fits Shovelhead models
1966-1984 and XL models 1957-1985. Replaces OEM 7875. Sold in 4 pack.
| Part # | Description |
List Price | Your Price |
| CS300257 | Chrome Rocker Shaft Nuts with red plastic insert. Fits Shovelhead models 1966-1984 and XL models 1957-1985. | $11.95 | $10.95 |
| CS300256 | Chrome Rocker Shaft Nuts with black plastic insert. Fits Shovelhead models 1966-1984 and XL models 1957-1985. | $12.95 | $11.95 |
Colony Knucklehead Replacement Nut Set
Chrome duplicates of the original parts with the addition of an 0-ring seal. Set
of four nuts and four seals.
| Part # | Description |
List Price | Your Price |
| CC36063 | Colony Knucklehead Replacement Nut Set For 1937 thru 1947 Knuckleheads | $27.95 | $24.95 |
Colony Knucklehead Look-Alike Rocker Plug Sets
Replacement Nut Set Sold in sets of four. Chrome Rocker Arm Sold in sets of four.
| Part # | Description |
List Price | Your Price |
| CC36065 | Colony Knucklehead Look-Alike Rocker Plug Sets For Sportster® models 1971 thru 1985; Shovelheads 1971 thru 1984 | $19.95 | $17.95 |
| CC36064 | Colony Knucklehead Look-Alike Rocker Plug Sets For Sportster® models 1957 thru 1970; Shovelheads1966 thru 1970 | $19.95 | $17.95 |
Chrome Rocker Arm Shaft Plug Sets
For the rockershafts on Sportster models 1971 thru 1985 and Big Twin 1971 thru 1984. Set
of 4
| Part # | Description |
List Price | Your Price |
| CC36188 | Chrome Rocker Arm Shaft Plug Sets For the rockershafts on Sportster models 1971 thru 1985 and Big Twin 1971 thru 1984. Set of 4 | $24.95 | $21.95 |
Colony Chrome Rockershaft Cap Nut Kit
Replace the 'Red-Dot' nuts on the left-side of the rocker shafts of all 1966 thru 1984
Shovelheads and 1957 thru 1985 Sportster® models. Set of 4
| Part # | Description |
List Price | Your Price |
| CC36119 | Colony Chrome Rockershaft Cap Nut Kit Fits1966 thru 1984 Shovelheads and 1957 thru 1985 Sportster® models. Set of 4 | $7.95 | $6.95 |
Colony Rocker Box Acorn Nut Kits for Shovelheads
For all models 1966 thru 1984.
| Part # | Description |
List Price | Your Price |
| CC36151 | Colony Rocker Box Acorn Nut Complete Kit For all models 1966 thru 1984. | $35.95 | $31.95 |
Rocker Box Mounting Kit
For all models 1966 thru 1984.
| Part # | Description |
List Price | Your Price |
| CC36190 | Complete Rocker Box Mounting Kit For all models 1966 thru 1984. | $11.95 | $10.95 |
Colony Rocker Box Cap Nut Set
Custom cap nut set for the rocker boxes on all Shovelhead motors 1966 thru 1984.
| Part # | Description |
List Price | Your Price |
| CC36111 | Colony Rocker Box Cap Nut Complete Set for the rocker boxes on all Shovelhead motors 1966 thru 1984 | $35.95 | $31.95 |
Rocker Box Screw Covers
Chrome-plated die-cast covers for all Evolution® engines with Original Equipment
sockethead rocker box screws. Set of four
| Part # | Description |
List Price | Your Price |
| CC76010 | Rocker Box Screw Covers for all Evolution® engines with Original Equipment sockethead rocker box screws. Set of four | $13.95 | $12.95 |
Overhead Rocker Arm Oil Lines
Sets of two braided oil lines
| Part # | Description |
List Price | Your Price |
| CC12427 | Overhead Rocker Arm Oil Lines For 1966 thru 1984 Shovelheads | $19.95 | $17.95 |
| CC12428 | Overhead Rocker Arm Oil Lines For 1957 thru 1985 Sportster® models | $19.95 | $17.95 |
Rocker Box Stud Kit for Shovelhead Engines
This high-quality American-made kit contains 8 long studs, 2 short studs and 1
motor mount stud. The extra short stud provided replaces one of the long studs on
late-model Shovelheads.
| Part # | Description |
List Price | Your Price |
| CC28455 | Rocker Box Stud Kit for Shovelhead Engines Repl. late-model Shovelhead OEMs 17506-66, 17508-66 and 16864-48 | $34.95 | $30.95 |
Chrome Rocker Oil Lines
Chromed rocker box oil lines for Sportster® models and Shovelheads. Includes complete set
of fittings and seals (2 lines).
| Part # | Description |
List Price | Your Price |
| CC28015 | Chrome Rocker Oil Lines For Shovelheads 1966 thru 1984 (repl. OEMs 62783-66A, 62785-66A) | $13.95 | $12.95 |
| CC28016 | Chrome Rocker Oil Lines For Sportster® models (except magneto models) 1957 thru 1985 (repl. OEM 17324-57A) | $19.95 | $17.95 |
Rocker Box Oil Line Fittings
Includes chrome fittings and seals for the rocker box oil lines on all Sportster® models
and Shovelheads 1957 thru 1985.
| Part # | Description |
List Price | Your Price |
| CC12532 | Rocker Box Oil Line Fittings Set of 4. For Sportster® models and Shovelheads 1957 thru 1985. | $9.95 | $8.95 |
| CC12074 | Rocker Box Oil line sleeves (repl. OEM 63529-57). For Sportster® models and Shovelheads 1957 thru 1985. pack of 10 | $3.95 | $2.95 |
If you don't see it here,
E-mail us.
We haven't had a chance to post it yet.
IMPORTANT:
We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.
Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
manufacturer.
We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .
Our intention is to provide products that can be used on a Harley-Davidson®
motorcycle.
CAS sells officially licensed Harley-Davidson® products.
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail, Sportster, Sturgis, Super Glide, Low Rider,
and
Wide Glide are registered trademarks of Harley-Davidson® Inc., Milwaukee
Wisconsin, U.S.A. The words, Duo Glide, Dyna Glide, Fat Boy, Hydra Glide and
Bad Boy are trademarks of Harley-Davidson®, Inc., Milwaukee, Wisconsin, U.S.A.
The following model designations for Harley-Davidson® motorcycles are used in
this catalog for reference only: EL, FL, FLH, FLHR, FLHS, FLHT, FLHTC, FLHTC-I,
FLHTS, Ultra, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLT, FLTC, FLTC Ultra,
FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS, FXDS-Conv., FXDWG, FXE, FXEF,
FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-Conv., FXRS-SP,
FXRT, FXS, FXSB, FXST, FXSTC, FXSTS,FXSTSB, FXWG, GE, K, KH, WL, WLA,
XL, XLCH, XLCR, XLH, XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX,
AND XR1000. All other brand names or trademarks, or registered trademarks
used in this catalog are the property of their respective holders.
Please review our terms
and conditions page Thank You