Home Orders Retail Index E-Mail

CAS4 Logo
High Quality  Parts  from 
CAS4

INTAKE MANIFOLDS,
SEALS & HARDWARE
WE SELL ALL INTAKE MANIFOLDS - GIVE US A CALL

 

s & s MANIFOLD CONVERSION KIT

s & s MANIFOLD CONVERSION KIT - WE CARRY ALL SS MANIFOLDS - Must contact us for he price at this time.
This kit replaces the troublesome rubber compliance fittings with a rigid mount, aluminum intake manifold. Designed for use with 1-7/8" or smaller diameter carbs, these kits will accept S & S, Bendix, Keihin (except CV) and many other aftermarket units with 2-bolt pattern. Kit includes aluminum manifold, mounting flanges, seals and spacers.

Part #   OrderDescription   Price  
VT358018 S & S Manifold Conversion Kit Fits Evolution® Big Twins 1984-lip- NOT TWIN CAM CALL
VT358021 S & S Manifold Conversion Kit Fits Evolution Sportsters® 1986-2006 - NOT FUEL INJECTION CALL
VT350161 Flange Kit CALL
VT359051 Flange Adapter CALL

 

 

CHROME MANIFOLD FLANGE KIT

CHROME MANIFOLD FLANGE KIT

Part #   OrderDescription   List Price   Your Price
CS260097 Chrome Manifold Flange Kit Fits Big Twins 1990-up and Sportsters® 1986-up. Replaces OEM 27009-86A and 27010-86-A $12.95 $10.95

 

Intake Manifold Flanges for Evolution® Models

INTAKE MANIFOLD FLANGES FOR EVOLUTION® MODELS
For Evolution® Sportster® models from 1986 to present and Evolution® Big Twins from 1990 to present. Also fit RevTech®, HES Performance and S&S manifolds for Evolution® models.

Part #   OrderDescription   List Price   Your Price
CC59432 Intake Manifold Flanges for Evolution® Models For Front and Rear Set $6.95 $5.95
CC59431 Intake Manifold Flanges for Evolution® Models Front flange(repl. OEM 27009-86A) sold each $3.95 $3.50
CC59430 Intake Manifold Flanges for Evolution® Models Rear  flange(repl. OEM 27010-86A) sold each $3.95 $3.50

 

S & S INTAKE MANIFOLDS

S & S INTAKE MANIFOLDS
Genuine S & S single throat, intake manifolds for Big Twins 1966-1984 and Sportsters® 1957-1985. Compatible with Bendix, Keihin, Tillotson and S & S including "E" model carbs with throats up to 1-7/8". Available for O-ring or rubberband heads with stock length cylinders.

Part #   OrderDescription   Price  
CS040332 S & S Intake Manifold Fits Big Twins 1966-early 1978 and Sportsters® 1957-early 1978  with O-ring style heads CALL
CS040333 S & S Intake Manifold Fits Big Twin Shovelheads® late 1978-1984 and Sportsters® late 1978-1985 with rubber band style heads CALL

 

INTAKE MANIFOLDS

INTAKE MANIFOLDS
Replacement die-cast aluminum, intake manifolds for Big Twins and Sportsters®. Compatible with Bendix, Keihin, Tillotson and S & S carburetors with throats up to1-7/8". Available for O-ring or rubberband heads and stock length cylinders. 2-3/4"center-to-center bolt pattern.

Stock Length Intake Manifold

Part #   OrderDescription   Price  
CS040334 S & S Stock Length Intake Manifold Fits Big Twins 1966-early 1978 Sportsters® 1957-early 1978 with O-ring style heads. Replaces OEM 27021-71A CALL
CS040335 S & S Stock Length Intake Manifold Fits Big Twin Shovelheads late 1978-1984 and Sportsters® late 1978-1985 with rubber band style heads. Replaces OEM 27021-78 CALL

 

BILLET FLANGE TYPE MANIFOLD ADAPTER

BILLET FLANGE TYPE MANIFOLD ADAPTER
This adapter allows the use of a Mikuni HSR-42 or late model OEM CV type carburetor on a Shovelhead, Panhead, Sportster®, or early Evolution® with 2-bolt flange manifold. Each unit is CNC machined from billet aluminum and left in a satin finish state.

Part #   OrderDescription   List Price   Your Price
CS040324 Billet Flange Type Manifold Adapter                                      $35.95 $29.95

 

INTAKE MANIFOLD FOR PANHEADS

INTAKE MANIFOLD FOR PANHEADS
This polished aluminum intake manifold is 4-1/4" long with 2-3/4" center-to-center stud spacing, and adapts Bendix, Tillotson, or Keihin (except CV type) carburetors to Panhead models 1955-1964. Can also be used to mount Mikuni carburetors when used with CSI# 040322 flange style adapter is used.

Note: Flange type carburetors may require use of CSI# 040330 manifold spacers. Some applications may require enlargement of flange mount holes.

Part #   OrderDescription   List Price   Your Price
CS040328 Intake Manifold For Panheads                                                   $29.95 $24.95

 

Manifold Conversion Kit
MANIFOLD CONVERSION KIT
A complete conversion kit that eliminates those troublesome intake manifold leaks common to Knuckleheads and Panheads with worn and distorted 'plumber' style manifold components.

Part #   OrderDescription   List Price   Your Price
VT-7314-9 Manifold Conversion Kit Converts 1940 thru 1954 Knuckleheads and Panheads $115.95 $90.95
VT-7315-3 Manifold Only  $79.95 $67.95
VT-35-0124 Manifold Only  $89.95 $75.95
VT-7344-6 Steel Conversion Kit $49.95 $40.95
VT-7627-4 Aluminum Weld-In Kit  $49.95 $40.95

Intake Manifold Nipples by Colony

INTAKE MANIFOLD NIPPLES BY COLONY
Restore both performance and appearance to early models with these precision machine duplicates of long-obsolete Original Equipment parts.

Part #   OrderDescription   List Price   Your Price
CC35616 Intake Manifold Nipples by Colony For all side valve 45" models from1937 thru 1973 $15.95 $13.95
CC35617 Intake Manifold Nipples by Colony For all side valve 74" and 80" models from1930 thru 1948 $15.95 $13.95
CC35618 Intake Manifold Nipples by Colony For all OHV 61 " models from1936 thru 1939 $15.95 $13.95
CC36179 Intake Manifold Nipples by Colony For all OHV 74 " models from1940 thru 1954 $16.95 $14.95

 

MANIFOLD ADAPTER KIT

MANIFOLD ADAPTER KIT
These adapters allow almost any possible combination of early (O-ring) or late (rubberband) manifolds and heads to be converted to the superior sealing 1978-1985 style rubber band intake seals and clamps. Kit includes 4 standard adapters and 2 stroker adapters. Standard adapters also work great on damaged O-ring style heads or cylinders. Stroker adapters convert most O-ring manifolds to stroker length. Note: Manifold not included.

Part #   OrderDescription   List Price   Your Price
040351 Manifold Adapter Kit                                                                      $8.95 $7.95

 

MANIFOLD SPACER FOR Keihin CARBURETORS

MANIFOLD SPACER FOR KEIHIN CARBURETORS
Fits most stud mounted carbs 2-3/4" center-to-center. 7/16" thick insulating spacer with gaskets. Stock replacement on Keihin carburetors 1976-1989. Replaces OEM 29250-78 and 27077-78.

Part #   OrderDescription   List Price   Your Price
CC17375 Manifold Spacer For Keihin Carburetors Replaces OEM 29250-78 and 27077-78. $19.95 $16.95

 

COMPLIANCE FITTINGS

COMPLIANCE FITTINGS
Fits Evolution® Big Twins 1984-1989. Replaces OEM 27008-83A and 27012-83A.Sold in pairs.

Part #   OrderDescription   List Price   Your Price
CS040560 Compliance fitting Fits Evolution® Big Twins 1984-1989. Replaces OEM 27008-83A and 27012-83A.Sold in pairs.  (VT358012)(CC17396) $29.95 $24.95
CS091033 Replacement fitting gasket. Replaces OEM 29242-83. Sold in 10 pack (VT150263) $7.55 $6.85

 

INTAKE SEAL KIT

INTAKE SEAL KIT
This kit contains the parts necessary to reseal the intake manifold on Big Twins 1990-up and Sportsters® 1988-up

Part #   OrderDescription   List Price   Your Price
CS091016 Intake Seal Kit to reseal the intake manifold on Big Twins 1990-up and Sportsters® 1988-up $4.95 $4.25

 

SPIGOT STYLE ADAPTERS

SPIGOT STYLE ADAPTERS
These spigot style adapters work with Mikuni or Lectron carburetors and  CSI #040327 and 040326 manifolds. 

Part #   OrderDescription   List Price   Your Price
CS040320 Stepped style manifold adapter. Fits 36-38mm carburetors $9.95 $8.95
CS040321 Straight through style manifold adapter. Fits 40-44mm carburetors $9.95 $8.95

 

FLANGE TYPE MANIFOLD ADAPTERS

FLANGE TYPE MANIFOLD ADAPTERS
These adapters allow mounting of Mikuni and Lectron spigot type carburetors to stock flange type manifold.

Part #   OrderDescription   List Price   Your Price
CS040322 Flange Type Manifold Adapter Used to mount 36-38mm spigot style carburetors to flange type manifolds with 2-3/4" center-to-center stud spacing. (VT354574)(CC17372) $13.50 $12.25
CS040323 Flange Type Manifold Adapter Used to mount 40-44mm spigot type carburetors to flange type manifolds with 3-5/16" center-to-center stud spacing. (VT359162)(CC17373) $16.55 $14.95

 

MANIFOLD SEALS

MANIFOLD SEALS
Sold in pairs

Part #   OrderDescription   List Price   Your Price
CC12085 O-ring type seals. Fits Big Twins 1954-early 1978 and Sportsters® 1955-early 1978. Replaces OEM 27060-55 - SOLD IN 10 PACK $6.95 $5.25
CC25102 Rubberband seals. Fits Shovelheads late 1978-1984 and Sportsters® late1978-1985. Replaces OEM 27062-78 - SOLD IN 10 PACK $21.95 $19.25

 

 

BELOW PARTS ARE DISCONTINUED - IMAGES / INFO ARE FOR REFERENCE ONLY.

WE DO NOT SELL THEM ANYMORE - NO FURTHER INFORMATION IS AVAILABLE.

 

RAM JETT MANIFOLDS FOR 80" EVOLUTION, XL EVOLUTION

P/N OrderDESC. Price
DS289207
Spigot manifold for stock 80" Evolution using 40mm CV or 42mm Mikuni carburetors DISCONTINUED
DS289210 For stock 80" Evolution with flange-mount carb or S&S kits 9700, 9788 (stock length) and 9902, 9996 (.015" longer); carb opening in manifold 1.812" DISCONTINUED
DS289215 For stock XL 883, 1100, 1200 XL Evolution, flange-type mount (must use 36-38mm spigot adapter flange, MVM36-200), 5/8" shorter to compensate for spigot adapter when using OEM CV carb on 88-00 models; carb opening in manifold 1 5/8" (40mm) DISCONTINUED
DS174336 Manifold-to-head gaskets, 10-pk. (Genuine James) DISCONTINUED

 

 

 

 

 

 

Email
If you don't see it here, E-mail us.
We haven't had a chance to post it yet.

IMPORTANT:

We at CAS are not a representative of any motorcycle manufacturer and the
parts we sell are not necessarily recommended by any motorcycle manufacturer.

Although our replacement parts are not original factory equipment, our intention
is to provide quality replacement parts that meet or exceed standards set by the
manufacturer.

We are not an authorized Harley® dealer and in no way do we have, or intend to
imply any kind of business relationship with Harley-Davidson Motor Company® .

Our intention is to provide products that can be used on a Harley-Davidson® 
motorcycle.   

CAS sells officially licensed Harley-Davidson®
products. 
However, any products with the trademark, name, word or OEM part number
used in this catalog by CAS is intended to be as a reference only to
the usage of that particular product. None of the parts and accessories in this
catalog were manufactured by or with the permission of the Harley-Davidson®
Motor Co. The words, Electra Glide, Evolution, H-D, Harley, Harley-Davidson, Low
Glide, Road King, Roadster, Softail, Sportster, Sturgis, Super Glide, Low Rider, and
Wide Glide are registered trademarks of Harley-Davidson® Inc., Milwaukee
Wisconsin, U.S.A. The words, Duo Glide, Dyna Glide, Fat Boy, Hydra Glide and
Bad Boy are trademarks of Harley-Davidson®, Inc., Milwaukee, Wisconsin, U.S.A. 
The following model designations for Harley-Davidson® motorcycles are used in 
this catalog for reference only: EL, FL, FLH, FLHR, FLHS, FLHT, FLHTC, FLHTC-I, 
FLHTS, Ultra, FLHX, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLT, FLTC, FLTC Ultra, 
FXB, FXD, FXDB, FXDC, FXDG, FXDL, FXDS, FXDS-Conv., FXDWG, FXE, FXEF,  
FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-Conv., FXRS-SP,  
FXRT, FXS, FXSB, FXST, FXSTC, FXSTS,FXSTSB, FXWG, GE, K, KH, WL, WLA, 
XL, XLCH, XLCR, XLH, XLH 883, XLH 1100, XLH 1200, XLR, XLS, XLT, XLX, 
AND XR1000. All other brand names or trademarks, or registered trademarks 
used in this catalog are the property of their respective holders.

Please review our
terms and conditions page Thank You